This exhibitor shows the following products and commodity groups:
The eurolaser L-1200 CON is the ideal laser cutting solution for seat covers and upholstery fabrics. The 1,800 x 1,230 mm working area offers sufficient space for textiles. The conveyor system ensures efficient production processes by automatic material loading and unloading. The working area used for processing textiles serves as a material carrier and at the same time as a transport element for the conveyor system. An automatic edge control helps to place the workpieces precisely and without fabric distortion. The laser produces a sealed cutting edge that does not fray. The contactless method also allows processing in all directions regardless of the fabric structure.
The additional modules Label and Ink Printer are particularly suitable for further processing of the cut textiles. The Label module applies labels; the Ink Printer module has one or three colour print heads that print on labels or the material directly with up to 600 dpi. In this way, sewing marks, barcodes or serial numbers can be easily applied to the material without additional workstations.
Laser cutting is characterised by high precision and repeatability. As there is no tool wear by using this contactless technology, the quality of the cuts remains constant. eurolaser GmbH offers CO2 laser cutting systems up to 3.20 m width and length and with laser soruces between 60 and 600 watts. Depending on the application and the processed material, various additional modules, software options and automation solutions are available.
The eurolaser XL-1600 represents the solution for cutting large veneer panels or entire furniture parts, e.g. cabinet doors: It has a working surface of 2,270 mm x 1,600 mm. There is no need to clamp or otherwise fix the workpiece. Depending on the material, the surface of the processing table has either a honeycomb or a pin structure. Laser cutting of wood is an efficient method: there are no chips and generally little contamination; the contactless process minimises waste and breakage. Laser cutting produces burr-free cutting edges and thus ready-to-install parts. For processing large wooden parts, eurolaser recommends equipping the XL-1600 with an additional tool, such as a milling cutter for contour cutting. With the additional Remote Operation module, the utilisation of the machine can be significantly increased. It divides the working area and allows simultaneous machining and loading of the table. Machining alternates between the table parts as required. This reduces the downtime required for loading to a minimum. A safety concept protects the operator during loading and unloading.
Laser cutting is characterised by high precision and repeatability. The quality of the cuts remains constant as the tool does not wear out. eurolaser GmbH offers CO2 laser cutting systems up to 3.20 m width and length and with laser sources between 60 and 600 watts. Depending on the application and the processed material, various additional modules, software options and automation solutions are available.