This exhibitor shows the following products and commodity groups:
INTERCOLL D 3460 - Spray adhesive for foams
INTERCOLL D 3460 bonds all usual padding materials, e.g. foam, fleece, cover fabrics, wood, hard fibre and cardboard. The waterbased polychloroprene-latex adhesive is also ideal for more difficult substrates such as non-woven fabrics, straps, etc.
INTERCOLL D 3460 enables a high working speed thanks to its high initial tack. This is achieved with a new formulation concept, whereby the adhesive already coagulates in the spray jet, thus no airing time is required. INTERCOLL D 3460 is a high-performance contact adhesive, which leads to immediate material fracture. But it can also be used as a single-sided adhesive,
thus allowing for corrections. Based on these properties, INTERCOLL D 3460 represents a genuine alternative to solventcontaining adhesives.
INTERCOLL D 3460 can be used at a low spraying pressure, thus reducing the overspray and optimising consumption. Despite the low spraying pressure, a high initial tack is achieved compared with commercially available single-component water-based foam adhesives.
The product can be applied using the "free-flow" method. To carry the material and to build up the necessary material pressure
in the gun, no special complicated equipment is required.
The practical packaging units can simply be placed on a shelf at least one metre above application height. The hydrostatic
pressure resulting from the height difference is entirely sufficient for the required material quantity. In comparison to the mixed two-component adhesive, INTERCOLL D 3460 contains more
solid material and therefore has a lower water content. This adds a drying benefit.
INTERCOLL D 3460 has a very high ageing resistance, which in turn leads to the long life of the end product. The environmental
friendliness is certified with the TÜV certificate and the Eco passport.
INTERCOLL D 3447 - Roller adhesive
for the mattress industry
INTERCOLL D 3447 is a versatile mattress adhesive which is ideal for the manufacture of all types of mattresses. The adhesive can be used for the assembly of sandwich mattresses and spring mattresses with high tension.
Thanks to the high viscosity of INTERCOLL D 3447 sinkage in the foamed material is minimised. As a result, the adhesive remains where it is used for bonding, on the foam surface. Hardening of
the adhesive seam is thus reduced.
The 1-C CR-Latex Roller adhesive INTERCOLL D 3447 is solventfree
and odourless, leading to good workplace hygiene.
The formulation concept means work equipment and hands can be cleaned with water without the need for special cleaning
INTERCOLL D 3447 is also available
container with Inliner, which ensures optimal removal of any remaining
adhesive and consistent and even material feeding.
Pressure tank systems are also suitable for easier feeding of the adhesive. The container can be erected at ground level.
INTERCOLL D 3447 has a very high ageing resistance, which in turn leads to the long life of the end product. The environmental
compatibility is certified with the TÜV certificate and the Eco passport.