Cologne: 04.–07.05.2021

#interzum

Congress Disruptive Materials

Kongress Disruptive Materials

interzum | © Constantin Meyer; Koelnmesse

By topic "Disruptive Materials - Changing the Future" some of the latest material innovations and disruptive technologies were presented at interzum 2019.

New materials are the main drivers of product innovation. This applies to product developers as well as to designers and architects.

With more than 100 exhibits on around 400 square metres in Hall 4.2, the special area focused on the main fields of innovation.

In addition to the exhibition, Haute Innovation has staged a conference event with 18 lectures on the main topics of the exhibition on three days of the fair. The following lectures took place:

Digital & Smart Materials
21.5.2019, 3:00 p.m. – 5.00 p.m.
Location: Forum hall 4.2
Disruptive Materials - Smart Materials Technologies Revolutionize Design & Architecture
Dr. Sascha Peters, HAUTE INNOVATION, Berlin
Smart to the power of three: Application scenarios for intelligent materials in architecture and design
Mattes Brähmig, Forschungskonsortium Smart hoch drei, Fraunhofer IWU, Dresden
Digitization of sleep through dynamic foams; super-oriented graphite as disruptive material for dissipating body heat
Tobias Kirchhoff, Variowell Development GmbH, Münster
Morphables: Programmable 4D textiles for design and interior design
Cathryn McAnespy, UDK Berlin
4DmultiMATS – Personalised 3D- and 4D-Printing of programmable, self-adjusting and multifunctional Material Systems
Tiffany Cheng , ICD, Universität Stuttgart
PLOTBOT/CRAWLER: Robot application for the functionalization of concrete walls
Samira Aden, Forschungsplattform Bau Kunst Erfinden, Universität Kassel
Biological Transformation & Material Efficiency
22.5.2019, 11:00 a.m. 1:00 p.m.
Location: Forum hall 4.2
Material Innovations for Biological Transformation
Diana Drewes, HAUTE INNOVATION
MycoTree: Mushroom building materials for CO2-free construction
Prof. Dirk Hebel, KIT, Karlsruhe
Wooden 3D Tubing: Lightweight structures made from super-stable high-tech woods
Yves Mattern, Lignoa Leichtbau GmbH
Algae Powered Thermometer & Moss FM: Energy from Plants
Fabienne Felder, LUMOT
Butong: Transparent concrete and living facades
Lars Höglund, Butong AB
Resortecs Stitching for a Circular Economy in Furniture
Cédric Vanhoeck, RESORTECS, Belgium
Innovative Production & Additive Manufacturing
23.5.2019, 1:00 p.m.-3:00 p.m.
Location: Forum hall 4.2
Disruptive Technologies for production & manufacturing
Dr. Sascha Peters, HAUTE INNOVATION
Construction botany - building with living plants
Prof. Ferdinand Ludwig, TU München
DETON 3D: Organic concrete with natural fibre reinforcement and 3D robot technologies for a vision of the future Construction 4.0
Nail Förderer, DETON, Berlin
Resortecs Stitching for a circular economy in Furniture
Cédric Vanhoeck; RESORTECS, Brussels
Large scale bio-based 3D printing: Re-defining architectural products
Hedwig Heinsman, Aectual, Amsterdam
Free Metal Blowing for architectural structures
Dr. Oskar Zieta, Zieta Design Studio, Wroclaw/Polen
Foldable Vehicles & Wheels
Andrea Mocellin, Revolve
Susanne Ruland

Any questions? We're happy to help.

Susanne Ruland
Event Manager
Tel. +49 221 821-2119
Write an e-mail